Part No.


Wireless lighting controller with universal power supply, 0v to 10v low voltage dimming  and rugged load relay.


Lighting Designers and Engineers specify LED luminaires to deliver savings and performance. Contractors are looking for quick, trouble-free installations. Everyone is looking for a cost effective solution that meets industry demands without complication or risk.


The wireless lighting controller designed to operate with today’s luminaires. Incorporating a universal power supply, 0 to 10 volt low voltage dimming capability and a rugged load relay. It is ideal for individual fixture or single zone lighting control.

Please contact us for pricing and Trade accounts or request a quote using the 'add to quote' button below. You can create a list of items and send a quote request direct to us. 

 To view your quote list please click on the 'view quote' button on the edge of this page. When you are ready please fill in your details and click on submit. We will then get back to you with a quote.

For the most up-to-date information on this product please download the Product Brochure above. 

  • Detail

Features, Benefits & Functions

  • Individual fixture or single zone control with 0-10V dimming  
  • Integrated daylight harvesting control with photo inhibit mode  
  • Occupancy control with auto- ON/OFF or vacancy control with manual-ON/auto-OFF  
  • Automatically detects dimming loads for easy adaption between switching and dimming functions
  • Used with battery-free wall switches, photo sensors and occupancy sensors  
  • Easy installation on electrical junction boxes with 1/2” mounting nipple bracket or surface mounting strap for mounting inside a lighting fixture or appliance  
  • Doubles as a telegram repeater  
  • Energy code compliant

The unit is a surface or nipple mount lighting controller that operates lights based on occupancy states, manual switch action, ambient light levels and gateway commands - implemented through scheduled events or network overrides.


Built-in intuitive application control begins with automating lights on and off through occupancy control when only a sensor is linked. Auto-detection on the dimming interface adjusts controller operation between switching to dimming automatically.   


A photoinhibit feature disables automatic ON lighting when the natural light measured by the light sensor is above set point. Energy code compliance is defined within factory defaults including partial on and partial off requirements.


Power Supply 120-277VAC, 60 Hz
Power Consumption 1.0 W max. fully loaded
Inputs LEARN and CLEAR buttons for sensor assignment
Outputs LED indicators, Learn (green), Power (red)
Maximum Dimming Load 0-10V with 100 mA sinking current
Inrush Current Rating 500A/2ms @277VAC (I2t: 460 A2s @ 277VAC)
Safety Standards Maximum Load: Type and Rating
Electronic Ballast 11.5A @ 120-277VAC
LED Driver 11.5A @ 120-277VAC
Radio Frequency 902 MHz
Antenna Integrated Whip
Transmission Range 24 m (80 ft) - commercial office spaces (typical),
 up to 100m (330 ft) line of sight
Operating Temperature -10°C to 60°C (14°F to 140°F) ambient
Relative Humidity 5% to 93% RH (non-condensing)
Weight 113g (4.0 oz)
Mounting ½” nipple mount model or strap mount model
Dimensions Nipple- 45.8 x 63.2 x 32.6mm (1.8 x 2.5 x 1.3”)
 Strap- 42.5 x 96.5 x 29.6 mm (1.7 x 3.8 x 1.2”)
Agency Listing & Compliance 
 California Energy Commission Title 24
 Washington State Energy Code
 ASHRAE 90.1-2013
 IECC 2015
 Certified to UL Standard 924
 Certified to UL Standard 60730
 Certified to CAN/CSA Std. E60730
Radio Frequency (902 MHz) 
 FCC Part 15.231 -Remote Control Transmitter
 IC RSS-210