4 Channel Contact Output Interface
4 Channel Contact Output Interface
CTL120

    Integrate wireless devices into existing panels, wired control systems, or energy management systems.

     

    The Contact Output Interface offers four dry contact outputs to interface with third-party devices and control systems. Each output can be set up individually, linked to one or many wireless switches or sensors based on standard profiles.

     

    With type-C contacts rated for 1 amp at 30VDC, it can interface with almost any equipment creating a hybrid control solution. Each output can be set up individually, linked to one or many wireless switches or sensors based on standard profiles.

     

    The Contact Output Interface is the easiest method of integrating wireless devices into existing panels, wired control systems, or energy management systems.

Please contact us for pricing and Trade accounts or request a quote using the 'add to quote' button below. You can create a list of items and send a quote request direct to us. 

 To view your quote list please click on the 'view quote' button on the edge of this page. When you are ready please fill in your details and click on submit. We will then get back to you with a quote.

    View Quote

For the most up-to-date information on this product please download the Product Brochure above. 


  • OVERVIEW
  • Detail
  • TECHNICAL

Features, Benefits & Functions

  • Four dry contact, type-c relay outputs
  • Each channel operates separately, switch or sensor commands from linked wireless devices trigger the output
  • Low voltage interface to fire alarm, security, lighting, or control panels
  • Easy integration into any Energy Management system
  • Panel or DIN rail mount
  • LED interface for channel status indication
  • Supports key card switch , rocker switch, occupancy sensor, photo sensor, window switch, and central command profiles
  • 8-30VDC/24VAC supply voltage
  • Available in 902 MHz

The interface uses wireless technology to monitor remote wireless switches and sensors and triggers an output channel based on the wireless devices state. The interface provides a convenient method of integrating your wireless controls with hard-wired systems like fire alarm systems, lighting panels, and building automation controllers. 

 

Each channel has a NO (normally open), NC (normally closed) and COM (common) terminal. Upon powering the interface, the default state is COM and NO shorted together. This state is referred to for this product as “relay closed”. When the relay state is open, terminals COM and NC will be shorted together  The interface can activate an output channel with received input from a linked sensor or switch. A total of 19 unique switches or sensors can be linked to the interface channels.  

 

The interface supports relay control with the following wireless devices: 

 

  • occupancy state monitored by a wireless occupancy sensor 
  • switch action from a wireless single or dual paddle rocker switch 
  • switch action from a wireless key card switch 
  • switch action from a wireless door/window switch 
  • gateway control implementing schedules or other events  

 

The interface works with wireless single and dual rocker switches. A switch ON action activates the relay closed. A press OFF action will open the relay. A switch can be linked to an individual channel or all channels.

Technical

Power Supply8-30VDC or 24VAC power input, 250mA maximum draw
InputsCH. Select, LEARN, and CLEAR buttons
OutputsFour dry contact type-C relays (Com, N.C., N.O.)
 Contact rating: 1 A, 30 VAC/DC max
 Two LEDs per channel: Red - CH.MODE
 Green - RELAY STATE
  
Radio Frequency902 MHz
AntennaWhip
Transmission Range24 m (80 ft) - commercial office spaces(typical),
 up to 100m (330 ft) line of sight
  
Operating Temperature-10 to 45°C / 14 to 113°F
Relative Humidity5 to 95% non-condensing
Weight111g (3.9oz)
Dimensions76.2 x 127 x 27 mm (3 x 5 x 1“)
MountingTwo screws (not included)
  
Radio Frequency (902 MHz)
 FCC Part 15.231 -Remote Control Transmitter
 IC RSS-210